✅ Fixed
Battery failed load test despite showing 12.4V. 4 years old. Replaced with new battery $115. Starts perfectly every time now.
Jeep Renegade 2020 Car wont start clicking sound
Jeep
Renegade
2020
On This Page:
🔍 Symptoms
⚙️ Causes
🔧 All Repairs
⚠️ Avoid These
🧾 Driver Reports
🔗 Similar Faults
🩺 Related Symptoms
⚡ Quick Summary
Severity Level
Medium
Safe to Drive?
⚠️ Drive with Caution
Safety Impact
Indirect risk — worth monitoring, not urgent
Urgency Level
🟡 Monitor Closely
Jeep Renegade 2020 car will not start. Rapid clicking when turning key. Battery lights dim when attempting to crank. 40945 km. This fault code is stored when the engine control unit detects a specific fault condition. Common causes include sensor failures, wiring faults, and component wear. Always read additional fault codes before replacing parts — multiple codes together provide a clearer diagnosis. Clear the code after repair and test drive to confirm the fault does not return.
🔍 Symptoms
📍 Car won't start — clicking sound only
📍 Jeep Renegade
⚙️ Possible Causes
Car won't start — clicking sound only
Jeep Renegade
Possible: Battery failed load test despite showing 12.4V. 4 years old. Replaced with new battery $115. Starts perfectly every time now.
Repair / Solution
Based on 94 driver confirmations
⚠️ Wrong Diagnosis?
No commonly reported misdiagnoses for this fault yet. If you have replaced a part that did not fix this Jeep Renegade 2020 problem, submit a wrong diagnosis report — it helps other drivers avoid the same costly mistake.
🧾 Driver Reports
🚗 More About This Vehicle
Explore more Jeep models
Help other owners by sharing your experience.
Your real-world fix helps thousands of drivers worldwide. Takes 2 minutes.