Subaru EJ engine head gasket failure is well-known: 1) External leak first — coolant seeps from gasket edges, appears on engine case. 2) Internal leak later — coolant enters combustion, white smoke from exhaust, milky oil. 3) Check cylinder compression — low compression in one cylinder with coolant loss = definitive diagnosis. Solution: head gasket replacement $1500-2500. Use OEM or Victor Reinz gaskets. Consider MLS (multi-layer steel) upgrade. After repair: use Subaru coolant conditioner every change to prevent recurrence.
Subaru head gasket failure — EJ engine coolant leak and white smoke
Subaru overheating. White smoke from exhaust. Sweet smell from engine. Coolant loss. This fault code is stored when the engine control unit detects a specific fault condition. Common causes include sensor failures, wiring faults, and component wear. Always read additional fault codes before replacing parts — multiple codes together provide a clearer diagnosis. Clear the code after repair and test drive to confirm the fault does not return.
🔍 Symptoms
⚙️ Possible Causes
Onarım / Çözüm
Based on 145 driver confirmations
⚠️ Yanlış Teşhis mi?
No commonly reported misdiagnoses for this fault yet. If you have replaced a part that did not fix this Subaru 2011 problem, submit a wrong diagnosis report — it helps other drivers avoid the same costly mistake.
🧾 Driver Reports
🚗 More About This Vehicle
📖 Related Repair Guides
Deneyiminizi paylaşarak diğer araç sahiplerine yardım edin.
Your real-world fix helps thousands of drivers worldwide. Takes 2 minutes.