GM 2.4 Ecotec oil consumption: well-documented issue on 2010-2014 Equinox especially. GM extended warranty on some VINs — check with dealer. Consumption test: check level after 2000 miles (not 5000). Piston ring replacement is the permanent fix. Also check PCV system for failure causing excessive oil vapor consumption. Timing chain: same oil change discipline required — sludge from long intervals causes chain issues. Class action settlement exists for some model years.
GM 2.4 Ecotec engine oil consumption and timing chain
GM 2.4 Ecotec burning oil. Using 1 quart per 1000 miles. Timing chain noise. This fault code is stored when the engine control unit detects a specific fault condition. Common causes include sensor failures, wiring faults, and component wear. Always read additional fault codes before replacing parts — multiple codes together provide a clearer diagnosis. Clear the code after repair and test drive to confirm the fault does not return.
🔍 Symptoms
⚙️ Possible Causes
Repair / Solution
Based on 134 driver confirmations
⚠️ Wrong Diagnosis?
No commonly reported misdiagnoses for this fault yet. If you have replaced a part that did not fix this 2010 problem, submit a wrong diagnosis report — it helps other drivers avoid the same costly mistake.
🧾 Driver Reports
📖 Related Repair Guides
Help other owners by sharing your experience.
Your real-world fix helps thousands of drivers worldwide. Takes 2 minutes.